Cdpilot

cdpilot

Zero-dependency browser automation from your terminal. One command, full control.

Quick Start

npx cdpilot launch    # Start browser with CDP
npx cdpilot go https://example.com
npx cdpilot shot      # Take screenshot

No config files. No boilerplate. Just npx and go.

Why cdpilot?

AI agents and developers need browser control that just works:

• Zero config — npx cdpilot launch starts an isolated browser session
• Zero dependency — No Puppeteer, no Playwright, no Selenium. Pure CDP over HTTP
• 70+ commands — Navigate, click, type, screenshot, network, console, accessibility, video understanding, progressive anti-bot resilience, and more
• AI-agent friendly — Designed for Claude, GPT, Gemini, and any LLM tool-use workflow
• Isolated sessions — Your personal browser stays untouched. cdpilot runs in its own profile
• Visual feedback — Green glow overlay, cursor visualization, click ripples, and keystroke display keep you informed during automation
• Multi-project isolation — Each project gets its own browser instance and port automatically, no conflicts
• AI control warning — Red toast notification appears when you hover during active automation
• Privacy-first — Everything runs locally. No data leaves your machine

Browser Selection (Workload-Aware Auto-Pick)

cdpilot picks the right browser for what you're doing. auto (default) is a two-axis policy — extension workload × platform stability:

Override anytime:

cdpilot browser            # show current pick + reason
cdpilot browser vivaldi    # pin to Vivaldi
cdpilot browser chrome-for-testing   # pin to Chrome for Testing (after installing it, below)
cdpilot browser auto       # restore smart default

Why the split?

• Chrome 137+ silently drops --load-extension for unpacked extensions (no error, no warning) — Google removed it from branded Chrome builds (PSA). Verified — chrome://extensions shows 0 items.
• Vivaldi, Brave, Edge, Chromium and Chrome for Testing honor --load-extension (tested).
• On macOS 26 (Tahoe) Brave 1.89 crashes deterministically at ~7min uptime (SIGTRAP in ThreadPoolForegroundWorker). cdpilot detects the OS and demotes Brave automatically until a fixed Brave release ships.

Each browser gets its own isolated profile (~/.cdpilot/.../profile-vivaldi etc.) so switching never causes prefs corruption.

Extension development: Chrome for Testing

If you develop an extension against Chrome itself, install Chrome for Testing (CfT) — the Chrome team's versioned, non-auto-updating Chrome build for automation, which still loads unpacked extensions:

cdpilot browser install chrome-for-testing                    # latest Stable
cdpilot browser install chrome-for-testing --channel beta     # stable | beta | dev | canary
cdpilot browser install chrome-for-testing --version 154      # a milestone, or a full version (154.0.8037.57)
cdpilot ext-install ./my-extension/                           # register your unpacked extension
cdpilot browser status                                        # shows the CfT version and path

• Download only on that command. It is a one-time ~150-190 MB zip (mac-arm64 at 154.0.8037.57: 191,429,663 bytes); cdpilot never fetches it by itself. The build comes from the official CfT JSON endpoints (last-known-good-versions-with-downloads.json, per-version and per-milestone files). Those list URLs only, no hash, so the download is checked against the server's Content-Length and its x-goog-hash md5; the zip's SHA-256 is recorded.
• It is extracted to $CDPILOT_HOME/browsers/chrome-for-testing/<version>/ (on macOS the quarantine attribute is cleared on that directory only) and recorded in installed.json.
• Used automatically for extension work: while dev extensions are registered, a branded Chrome pick (cdpilot browser chrome, or auto with Chrome the only extension-capable choice) becomes Chrome for Testing, with one stderr line saying so. Without CfT installed, ext-install on Chrome prints the install command and keeps Vivaldi/Brave as the alternative. cdpilot browser chrome-for-testing selects it always. An explicit CHROME_BIN is never replaced.
• It runs with cdpilot's usual per-project isolated profile (profile-cft).
• It is for extension development and testing — not a stealth browser. cdpilot makes no anti-bot claims for it; use your regular browser setup for that.
• Linux (Ubuntu 23.10+): AppArmor blocks unprivileged user namespaces, and CfT (unlike the distro's Chrome package) has no profile allowing them, so it exits at start. cdpilot prints this hint; allow them with sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0.

Installation

# Use directly (no install needed)
npx cdpilot <command>

# Or install globally
npm i -g cdpilot

Requirements: Node.js 18+, Python 3.10+, and one of: Brave Browser, Google Chrome, or Chromium. (The Python websockets module is auto-installed by the pre-flight wizard on first launch.)

First-time setup

npx cdpilot setup     # Auto-detect browser, create isolated profile
npx cdpilot launch    # Start browser with CDP enabled
npx cdpilot status    # Check connection

Claude Code plugin marketplace

Install cdpilot's MCP server and its skill straight into Claude Code, no .mcp.json editing required:

/plugin marketplace add mehmetnadir/cdpilot
/plugin install cdpilot@cdpilot

This registers the cdpilot MCP server (npx cdpilot mcp) and a short skill that teaches Claude Code when and how to reach for cdpilot's commands. See .claude-plugin/marketplace.json and plugins/cdpilot/.

MCP Bundle (.mcpb)

For MCP clients that support one-click local server installation (Claude Desktop and others), download the .mcpb file attached to the latest release and open it, or build it yourself:

npm run build:mcpb   # writes cdpilot.mcpb at the repo root

The bundle still needs the same runtime on the machine that runs it: Node.js 18+, Python 3.10+, and Brave/Chrome/Chromium installed. See manifest.json for the bundle's MCP Bundle manifest (spec).

Upgrading from 0.4.x → 0.5.0 — read this first

One breaking change, the rest is additive.

Breaking — Visual feedback default flipped to OFF. The green glow border, animated fake cursor, click ripples, and keystroke display made cdpilot feel like an amateur typing on every page. They are now opt-in:

cdpilot show on     # restore the old visual feedback layer
cdpilot show off    # default since 0.5.0

The MCP server's persistent-glow flow (CDPILOT_MCP_SESSION=1) is unchanged — AI agents that rely on visible feedback during a session still see it automatically. Only direct-CLI users see the difference.

New in 0.5.0 (no migration needed):

• cdpilot dismiss — heuristic auto-click for "Stay signed out / No thanks" buttons on LLM chat sign-up walls.
• cdpilot adaptive on — auto-escalate to stealth on CAPTCHA-protected hosts, with persistent per-host memory.
• cdpilot cookies save/load — export/import cookies as JSON to replay CF/DataDome clearance across runs.
• cdpilot context create/list/close + CDPILOT_TARGET — isolated browser contexts for true parallel automation inside a single browser.
• cdpilot fast / cdpilot show — bundled timing + visual toggles.
• Pure performance: post-load sleep 1500ms → 300ms, scrollIntoView instant, WebSocket connection pool, /json TTL cache.

See CHANGELOG.md for the full list with rationale.

Commands

Navigation & Content

cdpilot go <url>              # Navigate to URL (alias: open <url>)
cdpilot content               # Get page text content
cdpilot html                  # Get page HTML
cdpilot shot [file]           # Take screenshot (PNG)
cdpilot pdf [file]            # Save page as PDF

Interaction

cdpilot click <selector>      # Click element
cdpilot type <selector> <text># Type into input
cdpilot fill <selector> <val> # Set input value (React-compatible)
cdpilot submit <form>         # Submit form
cdpilot hover <selector>      # Hover element
cdpilot keys <combo>          # Keyboard shortcut (ctrl+a, enter, etc.)
cdpilot scroll-to <selector>  # Scroll element into view
cdpilot drag <from> <to>      # Drag and drop

A real mouse click (inside a frame, or --entropy=on) whose target moves or gets covered while the button is held is not clicked again by script: click prints Pressed (released elsewhere, not clicked): … and ends with exit 3 (pressed, release missed the target, not clicked; 1 stays "error"). A target the page replaced or navigated away from on mousedown prints Pressed (the page replaced or left it, not clicked): … and exits 0. MCP (browser_click, browser_smart_click) returns isError: false with a first line {"clicked": false, "reason": "moved"|"gone"|"unknown"}. batch and run finish every step, then exit 1 if a step failed, else 3 if a click was not clicked, else 0.

Element targeting inside iframes

Card forms (Stripe/iyzico-style), embedded login widgets and the reCAPTCHA checkbox live inside <iframe>s. Name the frame chain before the element selector with >>>, or pass --frame:

# Payment-style page: the card fields are inside <iframe id="card" title="Secure card payment">
cdpilot fill  "iframe#card >>> input[name=cardnumber]" "4242424242424242"
cdpilot type  --frame "#card" "input[name=cvc]" "123"
cdpilot click "iframe[title='Secure card payment'] >>> button#pay-btn"

# Nested frames: outermost first
cdpilot click "iframe.checkout >>> iframe.card >>> button"

# --frame <selector|index|url-substring>, nestable with >>>
cdpilot click --frame 0 "button.submit"                   # first iframe (same order as `frame list`)
cdpilot fill  --frame "url=js.stripe.com" "input[name=cardnumber]" "4242424242424242"
cdpilot frame list --frame "#card"                        # iframes inside that frame
cdpilot frame eval --frame "#card" "document.title"       # runs in the frame's own page context

• Works for click, fill, type, submit, hover, dblclick, rightclick, smart-click, smart-fill, smart-select and frame list|eval|shadow.
• A frame hop is a CSS selector, a 0-based index, a name/id, or url=<src substring>. --frame also takes a bare src substring. >>> inside quotes or [...] is literal. A selector that matches an element wrapping an iframe (Stripe's #card-element) enters the iframe inside it and says so on stderr: note: '#card-element' is not an iframe; using the iframe inside it.
• Selectors and texts that already contain >>> keep working: when the part before the first >>> finds no iframe in the page, or a segment is empty (click "Next >>>"), the whole string is used as written, exactly as before. If that fails too, one stderr line explains: note: 'Home' matched no iframe; used the selector as written. --frame never falls back: a frame it cannot find is an error (exit 1).
• For smart-click / smart-fill / smart-select the part before the first >>> is a frame only if it looks like a selector (it has #, . or [, or starts with an iframe/frame tag) or is url=…; words stay text. smart-click "Main >>> Settings" clicks the page's "Main >>> Settings" link even when a <main> element holds an iframe. For a frame index or a bare name use --frame.
• Same-origin and cross-origin frames work, including out-of-process iframes (site isolation): cdpilot resolves each hop over CDP (DOM.describeNode → frame id → the frame's execution context, or Target.attachToTarget with a flat session for an out-of-process frame), never through contentDocument, which the browser blocks cross-origin.
• Inside a frame, click and smart-click are real mouse input (isTrusted: true), like hover, dblclick, rightclick and --entropy=on clicks; an element with no box falls back to a script click. Mouse input is dispatched at page coordinates: each frame's offset and scale (, ) in the page is applied automatically, so the browser hit-tests into the right frame. Before pressing, cdpilot checks the point ( in each document on the way); if something covers the target, such as a cookie banner, it clicks the target by script instead and says so on one stderr line (). cdpilot's own input blocker (, MCP sessions) lets only cdpilot's click through, for the click itself.

Debugging

cdpilot console [url]         # Capture console logs
cdpilot network [url]         # Monitor network requests
cdpilot debug [url]           # Full diagnostic (console+network+perf+shot)
cdpilot perf                  # Performance metrics
cdpilot eval <js>             # Execute JavaScript
cdpilot eval-batch <json>     # Run N JS expressions in 1 roundtrip (5-30x faster)

# Example: read 4 DOM values in a single CDP roundtrip instead of 4
cdpilot eval-batch '["document.title","location.href","document.links.length","document.images.length"]'
# → [{"ok":true,"value":"..."}, {"ok":true,"value":"..."}, ...]

Performance

cdpilot block                                # Show status
cdpilot block on                             # Enable (default preset: images+fonts+ads)
cdpilot block off                            # Disable
cdpilot block preset images,fonts,ads,media  # Set patterns from named presets
cdpilot block patterns '*.png' '*.woff2'     # Custom URL patterns
cdpilot block clear                          # Drop all patterns

Stealth caveat: block changes the fingerprint surface — real browsers fetch images, fonts, and analytics. Cloudflare-class bot detectors notice missing requests. Keep block off for stealth/anti-bot targets; turn it on for known-safe internal sites where speed matters more than blending in.

cdpilot fast                       # Show status (effective auto-wait ms)
cdpilot fast on                    # Auto-wait 5s → 2s, less idle padding
cdpilot fast off                   # Back to defaults
CDPILOT_WAIT_MS=1000 cdpilot click # Per-command override (env wins over fast mode)

cdpilot show                       # Show status (visual feedback on/off)
cdpilot show on                    # Re-enable glow border + cursor + ripples + keystrokes
cdpilot show off                   # Default since 0.4.4 — quiet, professional output

Visual feedback default changed in 0.4.4 — the old animations (green glow, moving cursor, click ripples) used to make every action look like an amateur driving the screen. They're now opt-in via cdpilot show on. The MCP server's persistent-glow flow (CDPILOT_MCP_SESSION=1) is unaffected — AI agents that rely on visible feedback during a session still see it automatically.

Tab Management

cdpilot tabs                  # List open tabs
cdpilot new-tab [url]         # Open new tab
cdpilot switch-tab <id>       # Switch to tab
cdpilot close-tab [id]        # Close tab
cdpilot close                 # Close active tab

Network Control

cdpilot throttle slow3g       # Simulate slow 3G
cdpilot throttle fast3g       # Simulate fast 3G
cdpilot throttle offline      # Go offline
cdpilot throttle off          # Back to normal
cdpilot proxy <url>           # Set proxy (legacy single-URL form)
cdpilot proxy off             # Remove proxy

# v0.7.0: named pools (BrightData, IPRoyal, Anchor, etc.)
cdpilot proxy add brd "http://USER:[email protected]:22225" --geo us
cdpilot proxy add ipr "http://USER:[email protected]:12321" --sticky
cdpilot proxy use brd         # Activate one pool
cdpilot proxy list            # Show pools (credentials redacted)
cdpilot proxy show [<name>]   # Active or named pool URL (redacted)
cdpilot proxy remove <name>   # Drop a pool

TLS Fingerprint (v0.8.0)

cdpilot tls-check                        # Probe JA3/JA4/H2 via tls.peet.ws
cdpilot tls-check --service browserleaks # Alternate echo
cdpilot tls-check --json                 # Raw JSON

Known limitation: v0.8.0 ships the probe (tls-check) but no in-tree TLS fix. There is no Chromium-based TLS-corrected browser that ships as a standalone binary exposing --remote-debugging-port. Camoufox is Firefox+Juggler (no CDP); Patchright / undetected-chromedriver / nodriver are Python/Playwright libraries, not standalone browsers. cdpilot's CDP-only architecture is incompatible with all of them without a protocol adapter. Tracking: v0.9 roadmap (TLS-MITM plugin using curl-impersonate semantics, OR BoringSSL-patched Chromium fork).

Request Interception

cdpilot intercept block <pattern>                    # Block requests
cdpilot intercept mock <pattern> <json-file>         # Mock responses
cdpilot intercept headers <pattern> <header:value>   # Add headers
cdpilot intercept list                               # List active rules
cdpilot intercept clear                              # Clear all rules

Device Emulation

cdpilot emulate iphone        # iPhone emulation
cdpilot emulate ipad          # iPad emulation
cdpilot emulate android       # Android emulation
cdpilot emulate reset         # Back to desktop

Geolocation

cdpilot geo istanbul          # Set location to Istanbul
cdpilot geo london            # Set location to London
cdpilot geo 41.01 28.97       # Custom coordinates
cdpilot geo off               # Remove override

Accessibility

cdpilot a11y                  # Full accessibility tree
cdpilot a11y summary          # Quick summary
cdpilot a11y find <role>      # Find elements by ARIA role

Session Management

cdpilot session               # Current session info
cdpilot sessions              # List all sessions
cdpilot session-close [id]    # Close session

Advanced

cdpilot cookies [domain]             # List cookies (filter by domain)
cdpilot cookies save <file> [<domain>]  # Export cookies as JSON
cdpilot cookies load <file>          # Import cookies (replay CF clearance)
cdpilot cookies save --host x.com    # Save to per-host cache
cdpilot cookies load --host x.com    # Load from per-host cache
cdpilot cookies list                 # Cached hosts + age + CF clearance flag
cdpilot cookies clear --host x.com   # Remove one host
cdpilot cookies clear --all          # Wipe entire cache
cdpilot cookies clear --older-than 7d  # Remove stale entries
cdpilot cookies auto on              # Toggle global auto-save/replay flag (v0.6.1: requires safe-list)
cdpilot cookies auto add <host>      # Opt host into auto save/replay (v0.6.1)
cdpilot cookies auto remove <host>   # Remove host from safe-list
cdpilot cookies auto list            # Enable flag + current safe-list
cdpilot cookies cf-replay <url>      # Inject cached CF clearance before nav
cdpilot wipe [--cookies|--storage|--tabs|--keep h1,h2]
                                     # v0.6.2: per-task state hygiene (cross-task contamination)
cdpilot storage               # localStorage contents
cdpilot upload <sel> <file>   # Upload file to input
cdpilot multi-eval <js>       # Execute JS in all tabs
cdpilot headless [on|off]     # Toggle headless mode
cdpilot frame list            # List iframes (index = --frame <index>)
cdpilot frame eval --frame <f> <js>  # Run JS inside an iframe (cross-origin too)
cdpilot dialog auto-accept    # Auto-accept dialogs
cdpilot permission grant geo  # Grant geolocation

Parallel Contexts

cdpilot context create [url]  # Make fresh browser context + tab (prints JSON)
cdpilot context list          # Tree of contexts and their tabs
cdpilot context close <ctx>   # Destroy a context (refuses 'default')

Address a specific context's tab in subsequent commands via the env pin:

ID=$(cdpilot context create https://example.com | jq -r .target_id)
CDPILOT_TARGET=$ID cdpilot eval 'document.title'

True isolation — each context has its own cookie/storage jar. Designed for running N AI chat queries in parallel without history pollution, or A/B testing logged-in vs logged-out flows without spinning up multiple browsers.

Smart Navigation (LLM-aware)

cdpilot dismiss               # Click best "Stay signed out / No thanks" button
cdpilot dismiss aggressive    # Handle chained modals (cookie banner → signup)

Built-in English + Turkish pattern library. Explicitly excludes destructive lookalikes (Delete account, Sign out, Subscribe) — safe to chain into a query workflow.

Video Understanding

A single screenshot can't see motion. cdpilot watch runs a continuous screencast (Page.startScreencast) into a ring buffer of JPEG frames, so an AI agent can query a time window and actually watch what happened — animations, mouse cursor movement, scroll, an explosion effect — instead of guessing from one still frame.

cdpilot watch start <url|file://...>   # Begin screencast, play the video
cdpilot watch query --at 1:23 --window 5s  # Frames around a timestamp
cdpilot watch ask "did the menu animate open?"  # Ask about recent frames
cdpilot watch status          # Show capture state + buffer size
cdpilot watch stop            # Stop the screencast

Works on both local files (file://...) and online video (YouTube, Vimeo, Twitter, Facebook, Instagram). Zero dependency — Pillow is optional and only used for motion-detection between frames.

DRM limitation: DRM-protected players (Netflix and similar) render as black frames at the CDP layer — cdpilot cannot capture them. Everything non-DRM works.

MCP exposes this as browser_watch_* tools for AI agents.

Video Understanding (commands)

cdpilot watch start <url|file://>     # Start screencast, play video
cdpilot watch query --at 1:23 --window 5s  # Frames around a timestamp
cdpilot watch ask "did the modal slide in?"  # Ask about recent frames
cdpilot watch status                   # Capture state + buffer size
cdpilot watch stop                     # Stop screencast

Stealth & CAPTCHA

Zero-dependency anti-fingerprint layer — patches navigator.webdriver, chrome.runtime, plugins (proper PluginArray inheritance), WebGL vendor/renderer, permissions, hardware concurrency, and the Worker constructor. Injected via Page.addScriptToEvaluateOnNewDocument before any page script runs. Disabled by default; opt-in.

At launch, cdpilot also passes --disable-blink-features=AutomationControlled, which closes the Blink runtime flag that Cloudflare and DataDome probe to detect an automated browser.

Real mouse clicks (frames, --entropy=on, click @ref, dblclick, rightclick) hold the button 40-120 ms like a person's press; CDPILOT_PRESS_MS=min-max changes the range (0-0 = instant).

Three-tier stealth mode

cdpilot mode is the recommended entry point — one switch that sets how much fingerprint surface cdpilot touches, lightest to heaviest:

cdpilot mode             # show current tier + what it injects
cdpilot mode regular     # no fingerprint patch — cleanest, fastest (default)
cdpilot mode stealth     # light patch: webdriver / chrome.runtime / permissions
cdpilot mode undetected  # full patch: + plugin array + WebGL + Worker

regular is the default because Stealth Bench V1 found the full patch set alone lowered scores — a synthetic plugin array is itself a tell. The stealth tier deliberately omits plugin spoofing; escalate to undetected only for hard targets. The adaptive layer learns the right tier per host and escalates on CAPTCHA. Effect applies on the next navigation. Env override: CDPILOT_MODE=<tier>. The legacy stealth on/off toggle still works and stays coherent with the tier:

cdpilot stealth on            # enable fingerprint patches (opt-in)
cdpilot stealth off           # disable (default)
cdpilot stealth status        # show which patches are applied

cdpilot captcha-check         # JSON detection of Turnstile/hCaptcha/reCAPTCHA/
                              # DataDome/PerimeterX/Arkose/GeeTest. Exit 0/3
cdpilot captcha-wait [sec]    # block until user solves (interactive)
                              # or poll with JSON stream (non-interactive)

cdpilot adaptive [on|off|status]
                              # Auto-escalate to stealth on hosts that show
                              # CAPTCHA. Persistent per-host memory.
cdpilot adaptive forget <host>
                              # Remove a hostname from the stealth list
cdpilot adaptive clear        # Drop the stealth host memory entirely

Adaptive mode is the "run fast, climb walls when seen" automation: cdpilot runs in the open lane by default, detects CAPTCHA after each navigation, and when it sees one — adds the host to a persistent list, retries once with stealth on. Never auto-demotes. Conservative by design.

Web Bot Auth (signed agent)

The opposite of stealth. Stealth tries to make the browser look like a person; Web Bot Auth says "this is an automated agent, and here is proof of which one". Every request the browser makes carries an Ed25519 HTTP Message Signature (RFC 9421) that a site, or Cloudflare in front of it, checks against a key directory you publish on your own domain. The format follows draft-meunier-web-bot-auth-architecture and draft-meunier-http-message-signatures-directory, and reproduces the Ed25519 test vectors of Cloudflare's reference implementation (cloudflare/web-bot-auth).

Optional dependency. Signing needs the cryptography package, for the Python cdpilot runs on (CDPILOT_PYTHON if you set it):

pip install cryptography

Without it, the bot-auth commands and launch --bot-auth print that hint and exit 2. Every other command works as before.

1. Generate the key (once):

cdpilot bot-auth init --agent-url https://your-domain.com

This writes an Ed25519 private key to CDPILOT_HOME/bot-auth/ed25519.key (default ~/.cdpilot), created with mode 0600. cdpilot never prints or logs the key, and it warns when the file is readable by others. The agent URL must be an https:// origin (no path). A second init refuses to replace the key unless you pass --force, because the new key would no longer match the directory you published.

2. Host the directory on your own domain, signed. cdpilot bot-auth directory prints the public key as a JWKS, where kid is the key's RFC 7638 JWK thumbprint. Cloudflare also requires the directory response to be signed, so --headers prints the headers to serve with it:

cdpilot bot-auth directory --headers        # headers, a blank line, then the JSON body
cdpilot bot-auth directory --headers --json # the same as {"authority", "headers", "body"}

Content-Type: application/http-message-signatures-directory+json
Signature-Input: sig1=("@authority";req);created=…;keyid="<thumbprint>";alg="ed25519";expires=…;nonce="…";tag="http-message-signatures-directory"
Signature: sig1=:<base64 Ed25519 signature>:

{ "keys": [ … ] }

Serve that body at https://your-domain.com/.well-known/http-message-signatures-directory with those three headers. The signature covers ("@authority";req), the host the directory is fetched from: by default the agent URL's host, or --authority <host>. There is one signature per key in the directory. It is valid for 24 hours (--ttl <seconds>), so a static host needs it refreshed daily, from cron or an edge function that runs the same signing. A cron example that rewrites the headers file and the body your web server serves:

# m h dom mon dow  — every day at 03:17, 48 h validity so one missed run does not break it
17 3 * * *  cdpilot bot-auth directory --headers --ttl 172800 --json > /var/www/wba/directory.json.tmp \
            && mv /var/www/wba/directory.json.tmp /var/www/wba/directory.json

Your server (or an edge function) reads headers and body from that JSON and serves them at the well-known path. --content-digest also covers the body (Content-Digest, RFC 9530), as in Cloudflare's reference vector; then the body must be served byte for byte as printed.

3. Launch a signing browser:

cdpilot launch --bot-auth        # or: CDPILOT_BOT_AUTH=1 cdpilot launch
cdpilot status                   # ... bot-auth: on (keyid <thumbprint>)
cdpilot go https://example.com   # this request is signed, and so is everything after it
cdpilot stop                     # stops the browser and the signer

launch --bot-auth starts a small detached signer next to the browser. It uses the same self-fork as the idle-close watcher and lives exactly as long as the browser. It holds one CDP connection and auto-attaches to every page, popup, new tab, out-of-process iframe and worker. It signs each request at the Fetch "Request" stage, including every redirect hop. So requests the page makes on its own are signed as well: timers, fetch() after your cdpilot command has returned, a tab the page opens. data:, blob: and chrome-extension: requests never leave the browser, so they pass through unchanged. If signing a request fails, that request goes out unsigned, one line is written to CDPILOT_HOME/bot-auth/signers/<port>.log (host only), and the page is never held up. Running launch --bot-auth against a browser that is already up adds the signer to it.

Each request gets three headers:

expires is created + 5 minutes. The nonce is 64 random bytes, base64-encoded, and new for every request.

This is the legacy Signature-Agent form (draft-05 A.2.3), and it is the default because it is the form Cloudflare's verifier accepts: Cloudflare rejects the dictionary form of later drafts. To send the dictionary form instead (Signature-Agent: sig1="https://your-domain.com", covered as "signature-agent";key="sig1"), run cdpilot bot-auth format dict (bot-auth format legacy switches back, bot-auth format shows it, bot-auth init --agent-format dict sets it at creation). It applies from the next launch --bot-auth.

What is not signed. WebSocket handshakes are not signed: the browser does not pass them through CDP's Fetch domain, so a wss:// connection the page opens goes out without the headers. Service-worker-internal cache hits and data:/blob: URLs never reach a server.

If the signer dies or hangs. While it runs, the signer holds every request of the browser at the Fetch stage until it has added the headers. If it is killed, requests go out unsigned; cdpilot status and cdpilot go then print one stderr line (signer not running, requests go out unsigned, run cdpilot launch --bot-auth again) until you do, or stop. If it is frozen (a stopped process, a debugger), requests hang: cdpilot stop and launch --bot-auth again. cdpilot trusts its signer state only for the process whose command line is that port's signer and only for the browser it attached to, so a stale state file whose pid was reused by another program is dropped, never signalled.

Idle close still works while the signer runs: the signer is attached to every page, so instead of "a page is attached" cdpilot counts the CDP clients other than the signer (by socket owner: netstat on macOS and Windows, ss on Linux), and a watch daemon or a Playwright session keeps the browser open. On Linux, ss -tnp shows only your own processes' sockets, so a client running as another user is not counted and idle close may close the browser under it.

Stealth conflict. Signing says "I am an agent", and stealth says "I am not". If you pass --bot-auth together with --stealth/--undetected, or while cdpilot mode is stealth or undetected, cdpilot prints one warning line and applies bot-auth. While the signer runs, no stealth script or user-agent override is injected, and adaptive escalation does not retry at a stealth tier.

Register with Cloudflare. Once the directory is live, submit it through the Bot Submission Form in the Cloudflare dashboard as a signed agent (an agent acting for its users) or a verified bot; see Cloudflare's signed agents and verified bots with cryptography posts. Sites behind Cloudflare then see your requests as coming from your agent. Sites that don't check Web Bot Auth ignore the headers.

Friction Ladder (progressive anti-bot detection)

Real sites don't just throw a CAPTCHA — they stack defenses incrementally. cdpilot friction reports which rung is currently active so an agent can react appropriately instead of guessing. Six levels, lowest to highest:

none → rate_limited → soft_captcha → login_wall → otp_sms → hard_block

cdpilot friction              # JSON: current rung + recommended response policy

Bilingual (English + Turkish) DOM heuristics. The detection is read-only — it never bypasses anything. The response policy is deliberately conservative:

• rate_limited → automatic exponential backoff + retry
• soft_captcha → defer to the captcha tools
• login_wall / otp_sms / hard_block → flagged for human handoff, not autonomously solved

That last line is an ethics boundary, not a missing feature: cdpilot will not attempt to defeat a login, an OTP/SMS gate, or an outright block on its own. MCP exposes this as browser_friction.

Press-and-Hold (PerimeterX / HUMAN behavioral challenge)

PerimeterX's "Press & Hold" is a behavioral challenge, not a token — there's no provider to call. The only solution is a real press → hold → release gesture, which cdpilot emits via the CDP Input domain: a Gaussian-randomized ~3–7s hold with ±1–2px micro-jitter while the button is held.

cdpilot press-hold                       # auto-find the px-captcha target
cdpilot press-hold "#px-captcha button"  # explicit selector

captcha-solve auto-routes here when it detects a perimeterx challenge. MCP exposes this as browser_press_hold.

Captcha Solver Plugins (v0.6+)

Optional integration with 2captcha, anti-captcha, and capmonster. Per-solve cost ~$0.001–0.003. API keys stored in ~/.cdpilot/captcha-providers.json (chmod 600) — never committed to git.

# One-time setup
cdpilot captcha config --provider 2captcha --api-key YOUR_KEY
cdpilot captcha config --provider anticaptcha --api-key YOUR_KEY  # fallback

# Enable auto-solve (adaptive layer auto-solves on detect)
cdpilot captcha auto on

# Manual solve (debug / scripting)
cdpilot captcha solve --type recaptcha-v2 --site-key SK --url https://example.com
# returns: {"token": "03AGdBq2...", "duration_ms": 12500, "cost": 0.003, "provider": "2captcha"}

cdpilot captcha solve --type hcaptcha --site-key SK --url URL
cdpilot captcha solve --type turnstile --site-key SK --url URL
cdpilot captcha solve --type funcaptcha --site-key SK --url URL

# Status & balance
cdpilot captcha status   # {"configured": [...], "preferred": "2captcha", "auto_enabled": true}
cdpilot captcha balance  # {"2captcha": 1.23, "anticaptcha": 0.50}

Supported types: recaptcha-v2, recaptcha-v3, hcaptcha, turnstile, funcaptcha

Tokens are injected via Runtime.evaluate CDP — no browser-side libraries required. When captcha auto on is set, the adaptive layer detects and solves automatically after each navigation. Without auto-on, detection still works but solving is manual.

Expected bench improvement (v0.6): reCaptcha 2/6 → 5+/6, hCaptcha 2/3 → 3/3

Image CAPTCHA + profile warming

captcha-solve handles the image-based rate-limit CAPTCHAs that the token solvers above don't cover:

cdpilot captcha-solve                       # auto-detect + route (incl. press-hold)
cdpilot captcha-solve --provider amazon-local  # offline OCR (default)
cdpilot captcha-solve --provider capsolver   # BYOK image-to-text
cdpilot captcha-solve --provider 2captcha    # BYOK image-to-text

• Amazon classic image CAPTCHA (the "Type the characters you see" page) is OCR'd offline via the optional amazoncaptcha library (pip install amazoncaptcha — pure-Python + Pillow, MIT). Not installed = the command reports it and exits cleanly; no hard dependency added.
• BYOK providers (capsolver, 2captcha) use their image-to-text APIs via CAPSOLVER_API_KEY / TWOCAPTCHA_API_KEY.

cdpilot profile warm          # age the profile for reCAPTCHA v3 score

profile warm browses a set of low-risk sites to build cookie/history age, which nudges reCAPTCHA v3's behavioral score upward over time. Slow by design — run it ahead of a session, not inline.

Public bot-detection panels, measured 2026-09-27, headless Brave (Chrome 154) (method and raw results):

• The remaining fpscanner fail is 'webdriver' in navigator, which is true in every modern Chrome; faking it away would make cdpilot the odd one out.
• regular's fails all come from the HeadlessChrome user agent. stealth/undetected rewrite it for the page load that go starts; a later, separate command in the same page can still read HeadlessChrome.
• new-tests: every key is ok; connectionRTT is reported as unknown in all tiers.
• nowsecure.nl and areyouheadless could not be measured (a fixed always-interactive Turnstile test key; HTTP 502).

Earlier figures on this page (sannysoft 24/24, intoli 6/6) were measured on v0.4.x in April 2026; they are replaced by the table above.

Reliability

cdpilot browser [name|auto]   # workload-aware browser selection
cdpilot browser install chrome-for-testing   # for extension development (see above)
cdpilot health                # JSON: alive, port, tabs, browser, today's crashes, idle close

cdpilot health is designed for shell watchdogs:

until cdpilot health >/dev/null; do cdpilot launch; sleep 2; done

Surfaces today's Brave crash count from ~/Library/Logs/DiagnosticReports/ on macOS — spot degradation before your automation silently stalls.

Auto-launch. A page command (go, content, click, shot, …) that finds the browser not running starts it the same way cdpilot launch does (same profile, same headless/visible setting), then carries on, printing one line to stderr: cdpilot: browser was not running — launched it (CDPILOT_NO_AUTOLAUNCH=1 to disable). Lifecycle, status and configuration commands (launch, stop, close, close-tab, stop-all, project-stop, session-close, status, health, tabs, sessions, projects, headless, proxy, browser, extensions, mcp, serve, …) never launch. CDPILOT_NO_AUTOLAUNCH=1 restores the old "CDP connection error. Is the browser running?" error and exit code 1.

Idle auto-close. A browser that a page command auto-launched, or that the MCP server launched (browser_launch included), closes itself after 15 minutes without a cdpilot command or a visible page change, so a finished agent task does not leave it holding memory. An explicit CLI cdpilot launch stays open (you may be browsing in it by hand) unless you ask: cdpilot launch --idle-close 30 or CDPILOT_IDLE_CLOSE=30. The env var also sets the auto-launch delay (read when the browser starts; fractions allowed); 0 turns idle close off. A browser you started yourself, or one cdpilot merely attached to, is never closed.

What counts as use: any cdpilot command except the read-only checks (status, health, projects, version — a cdpilot health watchdog loop does not keep the browser alive), MCP tool calls, serve requests, a CDP client still attached to a page (a long-running command, watch, Playwright via connectOverCDP), and any change in the open pages' URLs or in the set of tabs (someone navigating, a tab opened or closed). Title changes do not count, so a page that rewrites its own title (a clock, an unread counter) cannot keep the browser alive. cdpilot status and cdpilot health show idle close in 12m or idle close off.

How: every command stamps ~/.cdpilot/projects/<id>/last-activity; the launch starts a small detached watcher (one per port, no console window on Windows) that checks every ≤30 s, stops the browser like cdpilot stop, marks it stopped in the registry and exits — it also exits as soon as the browser is gone for any other reason. Browsers started by serve --api are managed by the server and have no idle close.

Timeouts. Any command takes --timeout <seconds>, before or after the command name, or a default from CDPILOT_TIMEOUT (the flag wins; 0 disables). It bounds the whole command's wall-clock: on expiry cdpilot prints cdpilot: timed out after <N>s (<command>) to stderr, kills the child processes it started and exits with code 124 (like GNU timeout). A browser that was already up and registered is left running.

cdpilot --timeout 10 click "#submit"      # before the command...
cdpilot shot page.png --timeout 30        # ...or after it
CDPILOT_TIMEOUT=60 cdpilot run flow.cdp   # default for every command (and each script line)

For mcp and serve the value is not applied to the long-running server itself; it is passed on to every tool call / request it runs.

Session log

Every command (and every MCP tool call) appends one JSON line to a local, per-project log, so when a browser task is done there is a record of what was done and found. Nothing leaves the machine.

cdpilot log                 # today's commands: time, exit, command, url, result
cdpilot log --md            # Markdown report: pages visited, actions, errors, files produced
cdpilot log --json          # raw lines (one JSON object per command)
cdpilot log --days 3        # include the last 3 days
cdpilot log --path          # where the files are

Each line has ts, cmd, args, exit, duration_ms, the page url and title after the command (when the command already had them), a ~200-char summary of its output, the error line, and files it wrote (screenshots, PDFs). Files live in ~/.cdpilot/projects/<project-id>/log/<YYYY-MM-DD>.jsonl.

Redaction happens before anything is written: values given to fill, type, smart-fill, smart-select, assert-value and dialog prompt become «redacted:N chars»; so do values of password/token/key/secret/cookie/auth flags and headers, token-shaped arguments, and URL query/fragment values whose names contain token, key, secret, password, auth, code or session. cookies and storage output is never logged; eval source is, with string literals over 40 chars cut and secret-looking ones replaced. Logging is best effort: it never changes a command's output or exit code, and a failed write costs one stderr line. CDPILOT_LOG=0 turns it off; CDPILOT_LOG_DAYS (default 14) sets how many days are kept. The MCP server exposes it as browser_log.

Use your own browser (human-in-the-loop)

An agent hits a CAPTCHA or a login wall it cannot get past. A person solves it, and the agent carries on in the same browser.

The simplest way needs no connect. cdpilot's own browser is a normal, visible window unless you launch it headless (cdpilot headless on / CHROME_HEADLESS=1). The person solves the CAPTCHA or logs in right there, and the agent continues:

cdpilot go https://example.com/dashboard   # agent: "captcha detected" / login wall
cdpilot captcha-wait 300                   # agent waits while the person solves it
cdpilot go https://example.com/dashboard   # agent continues in the same window

That window uses cdpilot's own profile, so the login stays for later runs.

connect is for a browser you start yourself, with a debugging port and your own profile directory (log into it once; it keeps its cookies):

# macOS
"/Applications/Google Chrome.app/Contents/MacOS/Google Chrome" \
  --remote-debugging-port=9450 --user-data-dir="$HOME/cdpilot-chrome"
# Linux
google-chrome --remote-debugging-port=9450 --user-data-dir="$HOME/cdpilot-chrome"
# Windows
"%ProgramFiles%\Google\Chrome\Application\chrome.exe" --remote-debugging-port=9450 --user-data-dir="%USERPROFILE%\cdpilot-chrome"

cdpilot connect 9450          # or: cdpilot connect ws://127.0.0.1:9450/devtools/browser/<id>
cdpilot connect --auto        # or: find it via a DevToolsActivePort file
cdpilot go https://example.com/dashboard
cdpilot disconnect            # forget it; the browser keeps running

Since Chrome 136, --remote-debugging-port is ignored on the default profile, so the separate --user-data-dir is required. connect --auto reads the DevToolsActivePort file of each known profile directory (~/cdpilot-chrome from the command above, Chrome stable/beta/dev/canary, Chromium, Brave, Vivaldi, Edge), skips files left over from a browser that is gone or was replaced on that port (the browser id in the file must match), and connects to the first live one. It asks over HTTP only; a WebSocket probe (which Chrome's chrome://inspect mode may answer with a permission prompt) is sent only when no live browser was found.

Not supported yet: Chrome's chrome://inspect/#remote-debugging toggle (Chrome 144+, your everyday logged-in profile). In that mode Chrome answers only on its WebSocket (/json/version and /json return 404) and may ask you to allow every new debugging connection, while cdpilot lists tabs over /json and opens a new connection per command. connect --auto recognises the mode and exits with code 2 and the start command above instead of half-working.

What cdpilot does with a connected browser:

• Page commands (go, click, fill, shot, …) run in a tab cdpilot opens for itself in a new window that does not take the focus (Target.createTarget with newWindow + background, so your window and tab keep it) on the first page command, and keep using that tab. close, session-close and the idle session cleanup close only such tabs, the ones cdpilot opened in this browser run, never the last one. Your own tabs are never navigated or typed into; only a command that names a tab touches it (switch-tab, close-tab <index|id>, CDPILOT_TARGET, and multi-eval, which runs its script in every open tab).
• It never closes or kills the browser. close, close --force, stop, stop --smart [--force], project-stop, stop-all, session-close and MCP browser_close close at most cdpilot's own tabs (above) and print "connected browser left running; run cdpilot disconnect to forget it". The idle auto-close never touches it, tabs --reap closes nothing, wipe, permission, cookies load and cf-replay are refused (add --allow-external to load/replay cookies anyway), context close only destroys a context context create made, and launch / MCP browser_launch start nothing.
• close-tab is an explicit command and can close your tabs: the active (cdpilot) tab with no argument, or any tab you name by index or id. It never closes the last tab, which would quit the browser on Windows and Linux.
• It injects nothing into it: no stealth patch or user-agent override (whatever cdpilot mode / stealth says), no glow, no input blocker, no dev-extension scripts, no auto-cookie restore.
• The registration stays until you run cdpilot disconnect. If the browser is closed, page commands exit 1 with "your connected browser is gone; run cdpilot connect again or cdpilot disconnect", and cdpilot never launches a browser in its place.
• connect refuses when this project already has a browser cdpilot launched ("stop it first (cdpilot stop) or use another project"), and only 127.0.0.1 / localhost is accepted (anything else exits 2). also stops this project's daemon.

Risks:

• Every cdpilot command, and any agent that can run cdpilot, can read and act with the cookies and sessions of that profile (mail, banking, admin panels). Use a profile that is logged into only what the task needs.
• The debugging port is open to every local program for as long as that browser runs, not just to cdpilot. Close the browser when you are done.
• Sites can tell automation more easily: cdpilot applies no stealth to a connected browser.
• cdpilot's tab sits next to yours in the same window, and an agent may still act in one of your tabs when it names it (switch-tab, close-tab <n>, multi-eval).

WebMCP tools (opt-in)

WebMCP lets a page register "tools" on document.modelContext: imperatively with registerTool(), or declaratively with <form toolname tooldescription> (inputs described by toolparamdescription). cdpilot lists and calls them through the browser's own API, getTools() and executeTool(). In Chrome the API is behind chrome://flags/#enable-webmcp-testing (Chromium 146+), so start the browser with it:

cdpilot launch --webmcp        # saved for this project: later launches (auto-launch too) keep it
cdpilot go https://example.com/shop
cdpilot tools list             # name, title, description, annotations, input schema
cdpilot tools list --json
cdpilot tools call add_to_cart '{"sku":"A1","qty":2}'
cdpilot tools call add_to_cart --arg sku=A1 --arg qty=2
cdpilot launch --no-webmcp     # turn it off again (applies at the next start)

• launch --webmcp adds --enable-features=WebMCP to the browser's command line and saves the mode next to the stealth mode (webmcp.json in the project profile); CDPILOT_WEBMCP=1|0 overrides it. cdpilot status shows a WebMCP line while the mode is on. Chrome reads feature flags only at startup: a browser that is already running keeps its flags until cdpilot stop.
• tools list shows the tools of the page and of its same-origin iframes (with the frame URL), marks form tools and whether the form submits itself (toolautosubmit), and shows title and the readOnlyHint / consequentialHint / untrustedContentHint annotations. Nothing is injected into the page: the list is the browser's registry at that moment, so it follows reloads and navigations. Both commands run in cdpilot's own isolated world (no Runtime.enable), so a page script that wraps getTools() / executeTool() cannot add tools, change results or see the calls; only if that world cannot see document.modelContext does cdpilot use the page's main world, and it says so on stderr. With no tools it says why (WebMCP not enabled in the running browser, not a secure context, browser too old, document not origin-keyed, or the page registered none) and exits 0.
• tools call checks the arguments against the tool's inputSchema first (required, type — true is not an integer —, enum, const, nested properties and items; other keywords are left to the page) and exits 1 on a mismatch, an unknown tool or a tool error. It passes an AbortSignal and aborts it when --timeout (default 20 s) runs out, then exits 124 with timed out after <N>s (--timeout); its execution was aborted. The signal fires at the --timeout deadline; the watchdog waits 3 s more so that report is printed. A form tool without toolautosubmit waits for a person to submit the form. When several frames register the same name, --frame <url-part> picks one (an exact frame URL wins); without it the top document's tool is used, and if there is none the call stops and lists the frames.
• MCP: browser_site_tools and browser_site_tool_call are listed only while the project's WebMCP mode is on (or CDPILOT_WEBMCP=1 for the server).

Security: tools call runs the page's own code, and tool names, descriptions and results are page content: treat them as untrusted. Arguments and results are written to the session log with secret-named fields (password, token, key, secret, auth, ...) redacted at any depth.

Scaling & Workstation Use

CDPILOT_OFFSCREEN=1 cdpilot launch   # headed, but no window on your screen

• Off-screen mode (CDPILOT_OFFSCREEN=1) keeps the browser headed (real rendering, no headless fingerprint) but positions the window where it can't steal focus — meant for automating on a workstation you're also using.
• Multi-instance pool (CDPILOT_POOL_SIZE) — planned, not shipped yet. See Roadmap.
• Docker + Xvfb harness — used in a separate, private benchmark repo (cdpilot-bench), not part of this package.

Use with AI Agents

cdpilot is designed to be called by AI agents as a tool:

Claude Code (MCP)

{
  "mcpServers": {
    "cdpilot": {
      "command": "npx",
      "args": ["cdpilot", "mcp"]
    }
  }
}

Any LLM (tool-use)

{
  "name": "browser",
  "description": "Control a browser via CDP",
  "parameters": {
    "command": "go https://example.com"
  }
}

Python (subprocess)

import subprocess
result = subprocess.run(["npx", "cdpilot", "go", url], capture_output=True, text=True)
print(result.stdout)

Environment Variables

How It Works

┌─────────────┐     HTTP/WebSocket      ┌──────────────┐
│  cdpilot │ ◄──────────────────────► │ Brave/Chrome │
│   (CLI)     │    Chrome DevTools       │  (CDP mode)  │
└─────────────┘     Protocol             └──────────────┘
       │                                        │
       │  Zero dependencies                     │  Isolated profile
       │  Pure HTTP + WebSocket                 │  Separate from your
       │  single file, stdlib + websockets      │  personal browser
       └────────────────────────────────────────┘

No Puppeteer. No Playwright. No Selenium. Just direct CDP communication.

Stealth Bench V1

cdpilot is benchmarked against a suite of 80 high-friction web tasks to measure success rates against modern anti-bot systems. Gemini 2.5 Flash drives cdpilot as the controller; success is defined as full task completion without interception.

v0.5.3 Results (current)

Version history

What cdpilot does not do: cdpilot is an avoidance engine, not a CAPTCHA solver. We prioritize structural stealth (JS fingerprinting, behavioral entropy) to prevent challenges from appearing. When a CAPTCHA blocks progress and cannot be bypassed, the task fails — that is the honest definition of our success rate. PerimeterX (2/18), GeeTest (0/4) and Akamai (1/6) are known weaknesses; v0.7+ (residential proxy) and v0.8+ (TLS fingerprint correction via camoufox) target these directly.

Recommended Configuration

Based on Stealth Bench V1 results:

• Speed-first (most use cases): cdpilot launch — default browser behavior, no patches
• Stealth-on (RECOMMENDED, best overall): cdpilot launch && cdpilot stealth on
• Full adaptive (specific captcha-heavy workflows): cdpilot launch && cdpilot stealth on && cdpilot adaptive on

The full adaptive layer is bench-neutral vs baseline (30/80 vs 30/80) for Stealth Bench V1's task mix. Stealth-only (32/80 = 40%) is still the best-performing single variant. For your specific workload, profile both and pick.

Comparison

Monetization / Pro (Coming Soon)

cdpilot CLI is and will always be free and open source (MIT).

Future paid offerings:

• cdpilot cloud — Remote browser instances, no local browser needed
• Team dashboard — Shared sessions, audit logs, usage analytics
• Priority support — Direct help for enterprise integrations

Security

• Isolated browser profile — cdpilot runs in ~/.cdpilot/profile, separate from your daily browser. Your cookies, passwords, and history are never exposed.
• No arbitrary file access — MCP screenshot filenames are sanitized and restricted to the screenshots directory. Path traversal is blocked.
• Safe CSS selectors — All selectors passed to querySelector are JSON-escaped to prevent injection.
• No network exposure — CDP listens on 127.0.0.1 only. Remote connections are not possible by default.
• No dependencies — Zero npm/Python runtime dependencies means zero supply-chain attack surface.

Found a vulnerability? Please email the maintainer directly instead of opening a public issue.

Cookie Persistence (v0.6+)

Per-host cookie cache with auto-replay before navigation. Particularly useful for sites with expensive challenges (Cloudflare, DataDome) — once passed, clearance cookies (cf_clearance, __cf_bm) are cached and replayed on next visit.

# Enable auto-mode — cookies saved/replayed on every navigate
cdpilot cookies auto on

# Manual per-host workflow
cdpilot cookies save --host x.com   # cache current session cookies
cdpilot cookies load --host x.com   # inject before navigating
cdpilot cookies cf-replay https://x.com  # explicit CF clearance injection

# Inspect and clean
cdpilot cookies list                     # all cached hosts + age + CF flag
cdpilot cookies clear --older-than 7d   # prune stale cache

Storage: ~/.cdpilot/cookies/<host>/cookies.json (chmod 600, never committed to git). Expired cookies are filtered automatically on load.

Roadmap

The only browser MCP with built-in test assertions. Here's what we've shipped and what's next:

Shipped

• 70+ CLI commands (navigate, click, fill, screenshot, PDF, console, network, video understanding, friction ladder...)
• MCP server for AI agent integration (Claude Code, Cursor, etc.)
• 10 built-in test assertions — assert, assert-url, assert-title, assert-count, assert-value, assert-attr, assert-visible/hidden, wait-for, check (batch), screenshot-diff
• test runner + trace viewer — cdpilot test [--watch] runs *.cdpt.js files; cdpilot trace open <run> opens a time-travel trace viewer for a run
• Accessibility tree snapshot (a11y-snapshot) — structured text with @ref handles the agent can act on directly, no vision model needed; 1.4–42× smaller than the page's raw HTML on the four pages we measured (2026-09-27). Not always cheaper than a screenshot: link-heavy pages produce more text than a small screenshot costs
• Token-efficient screenshots — element-level crop (13x smaller), JPEG quality control, format selection
• Vision fallback (describe) — a11y + screenshot + text in one call
• Annotated screenshots — @N badge overlays on interactive elements
• Auto-wait — MutationObserver-based, 5s automatic element waiting
• wait-for-text — adaptive text-based waiting (subtree + characterData) for streaming AI responses, async toasts, and selector-less synchronization
• eval-batch — run N JS expressions in 1 CDP roundtrip (5-30x speedup vs sequential eval)
• block — request blocking via Network.setBlockedURLs with built-in presets (images/fonts/ads/media), 3-10x faster page loads on opt-in
• — heuristic auto-click for LLM chat sign-up walls (EN+TR pattern library, destructive-action guards)

Coming Soon

• Multi-instance pool (CDPILOT_POOL_SIZE) — N independent browser processes with least-loaded dispatch
• Session recording & replay — record browser sessions and replay them deterministically
• Stealth mode (Pro) — human-like mouse/typing, anti-fingerprint, CAPTCHA solving
• cdpilot Cloud — hosted browser sessions API, REST + WebSocket MCP endpoint
• Chrome Extension — use cdpilot from any browser without CLI
• Performance audit — Core Web Vitals (LCP, CLS, INP) via CDP Performance domain
• WCAG accessibility audit — automated a11y compliance reporting
• Claude Code Skill mode — run as a .claude/skills/ skill in addition to MCP

Have an idea? Open an issue or submit a PR!

Contributing

git clone https://github.com/mehmetnadir/cdpilot.git
cd cdpilot
npm install
npm test

PRs welcome! Please read CONTRIBUTING.md first.

License

MIT — do whatever you want.