Orcareplay

OrcaReplay

English · 简体中文 · 日本語 · 한국어 · Deutsch · Français · Español · العربية

Your agent broke something at 2am. Replay it at 9am — exactly, offline, as many times as you like.

Record any coding agent. Reproduce the run byte-for-byte with no model called. Fork it from any step onto a different model and see who gets it right.

Built by the team behind OrcaRouter — one API key and one endpoint for Claude, GPT, Gemini, Grok, DeepSeek, Qwen and the rest. It is what orca setup points at by default, and what makes orca compare a single command instead of four provider accounts.

Find us: OrcaRouter All model APIs

Github Repos: OrcaCode Review · OrcaRouter Lite

Connect: X · Discord · Hugging Face · Ollama

Real output from one session — a Claude Code run recorded, replayed against the recording, then forked at checkpoint 4 onto two models and graded by npx tsc --noEmit. Nothing here is mocked up.

Try it in three commands

One npm package named orcareplay, which puts one command named orca on your PATH. There is no separate tool called "orca", and nothing is installed into your agent.

npm i -g orcareplay             # the package is orcareplay; the command it installs is orca

orca record claude              # your agent, unmodified, doing whatever it does
orca replay last                # the same run again — no network, no tokens, no charge
orca replay last --from 4 --model claude-haiku-4-5 --ui

The third line is the one people stay for: same files, same conversation prefix, different model from step 4 onward. The model is the only variable, which is what makes the answer mean anything.

The three commands at the top need an agent installed, a key, a network and real tokens. If you have none of those yet, one command brings its own:

orca quickstart

It writes a small project with a genuine bug in it and a recording of an agent fixing that bug, then replays the recording against the project with no model called: two failing tests before, four passing after, three turns served from the trace and nothing spent. --full prints the whole timeline and the replay as it happened.

Read your agent's own system prompt

A proxy that sees the whole loop also sees the prompt the harness assembled before it sent anything. One command captures it, scrubs the machine out of it, and files it by model:

node capture/capture.mjs claude --model claude-opus-5

Interactive prompts and -p prompts are not the same prompt, and neither is the same across models. See capture/README.md for the measured differences, the pitfalls, and the sanitising rules.

Why this exists

Agent debugging today is archaeology. You scroll a terminal, you re-run and get a different failure, you add print statements to someone else's harness. The tools that exist are observability tools: they tell you a run cost $4.12 and used 61k tokens, which is not the question you have. The question you have is why did it delete my migration file.

OrcaReplay answers that by giving you the run back.

The last two rows are the ones an SDK wrapper structurally cannot reach. Capture happens below the agent — at the process and socket boundary — so it does not matter whether the agent is yours, whether you can edit it, or whether it even holds an API key: a Codex CLI signed in with a ChatGPT subscription talks to its own backend over TLS, with a credential that only that backend accepts, so it cannot be pointed elsewhere and stay the same session — and orca can still record it. See when the harness will not be redirected.

How it works

Model APIs are stateless, so on every turn an agent resends the entire conversation — including the previous turn's tool results. A proxy in front of the model therefore sees the whole loop: each request, each streamed response, every tool call the model emitted, and every tool result the harness produced. That one property is what the tool is built on, and it is why OrcaReplay does not patch your agent — it stands up a local proxy, sets two environment variables, and gets out of the way.

What "egress blocked" means, exactly. On replay the proxy refuses to forward anything it cannot serve from the trace, so no model is called and no tokens are spent — that run prints egress=blocked. --loose lifts it deliberately: an unmatched request is then answered by the provider and recorded as a major divergence, and the same line reads egress=live-on-unmatched. A replay still executes the recorded tool calls for real, and a tool that opens its own socket — a shell command running curl, an MCP server fetching something — is outside the guarantee either way. By default it never reaches the proxy and goes to the network as usual. Under --tls-intercept it does reach the proxy, because that sets HTTPS_PROXY for the whole child: a host off the intercept list is tunnelled through untouched, though its hostname, port and byte counts still land in the trace, and a host on the list is refused there like any other unmatched call. Replay is not a sandbox; if you need one, run it inside one.

Three more layers catch what the protocol cannot see: an exit code, a real duration, which stream a byte came out of, a file written without telling anyone. A fifth exists for the agents that read no base-URL variable at all — see which agents. A sixth reads the agent's own account of its structure, for a harness that has one: which sub-agent ran, which handed off to which, whether a guardrail tripped, which graph node produced what and which of them called no model at all — none of which reaches the wire.

%%{init: {'theme':'neutral'}}%%
flowchart LR
    A["<b>your agent</b><br/><i>unmodified</i>"]

    subgraph orca["orca · six capture layers"]
        direction TB
        P["<b>proxy</b><br/>base-URL env var"]
        SH["<b>PATH shim</b><br/>exit code · timing · streams"]
        MC["<b>JSON-RPC tee</b><br/>MCP config rewrite"]
        FS["<b>shadow git index</b><br/>workspace per turn"]
        FH["<b>fetch hook</b><br/>for a hardcoded origin"]
    end

    A --> P & SH & MC & FS & FH
    P -->|"forwarded, auth intact"| U["<b>the model API</b><br/><i>or OrcaRouter · any gateway</i>"]
    orca ==> T[("<b>one trace</b><br/>.orca/runs/run_a1b2c3")]

They all land in the same timeline, ordered by when they actually happened rather than when orca got around to reading them.

Exact, fork and compare are one thing

They are not three subsystems. They are the same proxy with a cursor — the position in the recorded stream where it stops answering from disk and starts answering from the network.

%%{init: {'theme':'neutral'}}%%
flowchart LR
    subgraph disk["from disk · byte-for-byte · network blocked"]
        direction LR
        T1["turn 1"] --> T2["turn 2"] --> T3["turn 3"] --> T4["turn 4"]
    end
    T4 ==> CUR{{"<b>cursor</b>"}}
    CUR ==> T5
    subgraph net["from the network · any model you name"]
        direction LR
        T5["turn 5"] --> T6["turn 6"] --> T7["…"]
    end

A checkpoint is not recorded; it is derived — any point where the conversation prefix is complete and the workspace was snapshotted. Every fork therefore starts from a state that provably existed.

What a bug hunt actually looks like

Your agent was supposed to fix a failing auth test. It exited 0 and the test still fails. Start with what it actually did:

$ orca show last
run_6473f858b59e  [email protected]  14 events  exit 0

SEQ  KIND   WHAT                                            DETAIL
0    RUN    run started                                     generic-openai
1    SNAP   tree 919d32ba037537b43814c83779963b2cc3023db7   0 changed
2    MODEL  claude-opus-5                                   1 messages
3    MODEL  claude-opus-5                                   stop: tool_use · 100 in · 20 out
4    TOOL   edit_file                                       {"path":"auth.ts",…}
5    SNAP   tree c6af62b75c0c8b8938bd6087328b5148f3dcd534   1 changed
6    FILE   auth.ts                                         modified +1 −3
7    TOOL   edit_file                                       ok
8    MODEL  claude-opus-5                                   3 messages
9    MODEL  claude-opus-5                                   stop: end_turn · 101 in · 5 out
10   SNAP   tree c6af62b75c0c8b8938bd6087328b5148f3dcd534   0 changed
11   SHELL  ["sh","-c","node --check nonexistent-file.ts"]  /tmp/hunt
12   SHELL  shell result                                    exit 1 · 43ms
13   RUN    run ended                                       exit 0

info usage input=201 output=25 cost=$0.004890

Three facts the model's own transcript could not have told you, and the run's exit code hid: the file really changed (seq 6, +1 −3), the check the agent ran failed (seq 12, exit 1), and it finished anyway. The run exited 0 because the agent exited 0.

That last fact is the one worth a command of its own. orca show gives you the order things happened in; orca graph gives you what produced what:

$ orca graph last
FROM              TO               KIND      WHY
3 model.response  4 tool.call      recorded  tool_use block in the response
4 tool.call       6 fs.change      inferred  changed path appears in tool input, same or previous turn
4 tool.call       7 tool.result    recorded  tool result answers its call
7 tool.result     8 model.request  recorded  tool_result block in the request
11 shell.exec     12 shell.result  recorded  shell result answers its exec

  1 inferred — derived from this trace, not recorded in it

Two kinds of edge, and the difference matters. A recorded edge was written when the run happened, because a tool_use block is physically inside the response that emitted it. An inferred edge was worked out just now by the rule it names — a filesystem snapshot is taken once per turn rather than once per tool call, so attributing a file change to a particular call is a good guess and not a fact. Inferred edges are never written back into the trace, the same way checkpoints are derived and never recorded, so a field a third-party reader trusts never contains something orca made up.

--graph-card draws the whole run that way — time left to right, kind of thing top to bottom, with the chain that produced the failure lit against everything else:

The shape is the point. A run is one motif repeated — request, response, call, effect, result — so anything that breaks it is worth a look, and an event with no edge leaving it is an absence a list cannot show at all.

orca export last --card bug.svg draws just that chain, which is the version that fits in an issue or a message:

Nothing picked the subject by hand — --to was not passed. The card carries its own legend because a dashed line travelling without its trace would otherwise launder a guess into a fact, and it prints the command that reproduces it.

SVG renders in a GitHub issue and almost nowhere else that matters — X will not take it as an upload, and Slack and Discord give it no preview — so name the file .png and you get one, or .gif and the chain builds a hop at a time. That path needs a browser, and orca does not depend on one: docs/media/README.md keeps the render toolchain out of package.json so nobody running npm ci pays for a Chromium download, and a picture command is not a reason to reverse that. Ask for a raster without it and orca says the one line that fixes it; orca doctor reports it either way, and .svg never needs anything.

orca export last --card bug.png       # the chain, ready to post
orca export last --card bug.gif       # the same chain, one hop per frame
npm i --no-save playwright-core pngjs gifenc   # only needed for the two above

Now reproduce it as often as you like, for nothing:

$ orca replay last
info replay.done reused=2/2 exact=2 divergences=0 unmatched=0 exit=0

No network, no tokens, no variance. Then ask the question you actually have — would a different model have got this right?

$ orca compare last --from 5 --models claude-opus-5,claude-haiku-4-5 --verify "npm test"
MODEL             VERDICT  TOKENS  COST       WALL  RUN
claude-opus-5     pass     201/25  $0.004890  0.3s  run_1457b35062ba
claude-haiku-4-5  pass     201/25  $0.000326  0.3s  run_b8ee08479fb6

Both pass. One costs 15× less. Same files, same conversation prefix, same checkpoint — the model is the only thing that changed, which is the only reason that number means anything.

The timeline

orca replay last --ui (or orca ui) opens the run as one self-contained HTML file — no server to keep running, no network, nothing to install. Filter it, step it, or press space and watch the run play back at the pace it actually happened.

Every layer lands in the same timeline, so you can read the run as one story rather than four: the model turns and their token counts, each tool call with its arguments and result, the shell commands with their exit codes and timing, and the filesystem changes with the tree they produced.

orca export last -o bug.html writes exactly that page to a single file you can attach to an issue. It carries no external reference of any kind — CI asserts that — so it renders from a download folder, on a plane, in five years.

Same task, different model

orca compare forks one recorded run onto several models from the same checkpoint, with the same files and the same conversation prefix, and grades each one with a command you choose. The model is the only variable, which is what makes the answer mean anything.

orca compare last --from 4 \
  --models claude-sonnet-5,claude-haiku-4-5 \
  --verify "npm test" \
  --share verdict.svg          # the card above, ready to paste into an issue

Pointing it at several models

Comparing models means reaching several providers, and doing that by hand means knowing that --upstream-anthropic and --upstream-openai exist, that one gateway can serve both wire formats, and where the key goes. All of that is real and none of it is discoverable, so there is a command that asks instead:

$ orca setup
Gateway URL (serves the model APIs) [https://api.orcarouter.ai]:
  get a key at https://www.orcarouter.ai/console/token — OrcaRouter keys start sk-orca-
API key (stored 0600; leave blank for none):
  info config.saved path=~/.config/orca/config.json mode=0600 gateway=https://api.orcarouter.ai auth=stored

  6 models available:
    anthropic/claude-opus-5
    anthropic/claude-haiku-4-5
    openai/gpt-5.2
    ...

$ orca models
MODEL                      $/MTOK IN  $/MTOK OUT
anthropic/claude-opus-5    15         75
anthropic/claude-haiku-4-5 1          5
openai/gpt-5.2             1.25       10
some-local-model           —          —

orca setup asks the gateway what it actually serves rather than just writing the file, so a wrong URL or a dead key is an answer now instead of a 401 in the middle of a comparison. It also stores the models you picked, so after that orca compare last --verify "npm test" needs no model list and no upstream flags at all. orca models prices what it recognises and shows a dash for what it does not, because inventing a number for an unknown model is how a comparison table ends up quoting a cost that was never real.

OrcaRouter is the default answer to that first question — press Enter and you have one origin and one key serving Claude, GPT, Gemini, Grok, DeepSeek, Qwen and the rest, which is exactly the shape orca compare wants. Its model ids are namespaced by provider (anthropic/claude-sonnet-4.6, openai/gpt-4o-mini), which orca handles: the namespace picks the wire format and is stripped before pricing.

It is a default, not a destination: type over it, or pass --gateway <url>, and anything that speaks the OpenAI-compatible /v1/models and chat endpoints works just as well — another hosted gateway, or something you run yourself.

It is also only ever a default for traffic you asked to send somewhere. With no gateway configured, orca record proxies your agent's own calls straight to whatever provider it was already talking to, on the agent's own key. Orca does not reroute a recording you never configured: that would post your source code to a third party as a side effect of pressing record.

Non-interactive: orca setup --key <k> takes the default, orca setup --gateway <url> --key <k> names another, and --key-env <VAR> reads the key from the environment rather than keeping a credential on disk.

The key never reaches a trace. It is attached to the outbound request only, while what gets recorded is built from the incoming request with auth stripped — so it is invisible to the recording by construction, not by a rule someone has to remember. It is withheld entirely if a flag sends that traffic somewhere other than the gateway that issued it.

The other half of the run: orca push and orca pull

A local recording and a gateway recording see different things, and neither is the whole picture. orca record sits on your machine, so it sees the shell, the filesystem and MCP — the side effects. An OrcaRouter gateway sits on the wire, so it sees what no laptop can: every key, every colleague, every CI job, and the routing decision behind each call. Both write the same orca-trace v0, so the interesting direction was never one or the other. It was moving a run between them.

Until now that round trip was a browser download and a form upload. Three commands:

$ orca list --remote  # what the gateway is holding
$ orca push [run]     # this machine  ->  the gateway
$ orca pull <run>     # the gateway   ->  this machine

Real output. The card is generated by scripts/render-sync-card.mjs from docs/media/sync-transcript.txt, a captured round trip — orca record, then push, then pull into a different workspace, then orca show reading the pulled copy. No line is written by hand. The gateway there is a local stub speaking the same two endpoints, which is why its address is a loopback one.

push defaults to the last run, like every other run-taking command. pull will not: "last" means nothing on a machine that has not seen the run yet, so it takes an id.

Which is what orca list --remote is for. An id you do not have is not a default you can supply, and the only place to read one used to be the console in a browser — so the command that needs an id lived on a tab the terminal could not open. --remote asks the gateway the same question orca list asks this directory, over the GET on the path push already POSTs to:

$ orca list --remote --limit 3
RUN                           STARTED           SOURCE   APP             TURNS  TOOLS  LAYERS       MODELS                           OUTCOME
run_3d9e61a07b52              2026-09-21 09:36  upload   generic-openai  1      0      model,fs     m                                exit 0
run_8c14f2e9a07d3b6150e2c49a  2026-09-20 04:21  gateway  Unknown         1      0      model,route  deepseek/deepseek-v4-flash-free  end_turn
run_f07a5c2e91d4468bb3e0a17c  2026-09-20 02:02  gateway  curl            1      0      model,route  deepseek/deepseek-v4.1-flash     error

  orca pull <run>      # fetch one into this machine’s store

LAYERS is the column to read. It is what the two halves of this page are about: model and route come from the gateway, which sees the routing decision no laptop can; fs, shell, mcp and net come from a run recorded here. It says what is in a run before you spend a download on it. SOURCE sits beside it because where a run came from is a different question from what it holds.

STARTED is the run's first event, not the moment the gateway stored it — for a pushed run those differ by however long you waited before pushing. OUTCOME is the gateway's word for a run it recorded (end_turn, error) and the exit for one pushed from here. Anything the gateway does not report reads — rather than blank; an older deployment sends no timestamp at all, and STARTED is left unset rather than dated 1970. --source gateway narrows to what the gateway recorded; --source upload to what was pushed to it — those two, and a typo is refused rather than answered with an empty list; without the flag you get both. --limit sets how many (20 by default). --gateway stays what it is for push and pull — an optional override of which host — rather than doubling as the switch, so a destination you have already named needs no url typed at it. All three belong to --remote: given without it they are refused, not ignored, because orca list --gateway <url> answering with this directory's runs would read as that host's answer.

--json asks the same question: orca list --remote --json emits the gateway's runs as one document on stdout, which is where the id in orca pull <run> wants to come from when nobody is reading a table.

What it needs

A key with the replay scope, from Console → API Keys → replay. That scope can read and push Sessions runs and cannot relay, so it is not a model-traffic credential wearing another hat — a replay key is refused on the relay routes outright. Uploads are also off per workspace by default and turned on under Settings → request logs; a gateway that is only recording, not accepting, is the normal state.

$ export ORCA_GATEWAY_URL=https://api.orcarouter.ai   # or your own gateway
$ read -rs ORCA_GATEWAY_KEY && export ORCA_GATEWAY_KEY   # not typed on the command line
$ orca push last

Both exports persist for the shell session, which is the point of the rule above: a later orca push --gateway <somewhere-else> in that same shell is refused rather than quietly handed the key you exported for your own gateway.

What it will not do

• Never a default destination. orca setup may default the model gateway to OrcaRouter, because proxying a call your agent was already making is not a disclosure. A run is: it holds source, shell output and workspace snapshots, which travel with it as content-addressed blobs. So push has no default host. A gateway counts as a destination only when you NAMED it — --gateway, ORCA_GATEWAY_URL, or a URL you typed at orca setup — and the one orca setup fills in for you when you press Enter does not count, however well it serves your model traffic. Running plain orca setup and then orca push last is refused, and says why. push.packed also reports the file count and byte size before the request goes out rather than after.
• Never the workspace snapshots, unless you ask. orca scrub rewrites events.jsonl and the blobs, but it cannot rewrite the shadow git store under fs/ — its objects are deflated and addressed by the hash of their contents, so it searches them, tells you what is still in there, and offers --drop-fs. Push therefore leaves fs/ at home by default: a scrub that reports "objects still hold the material" must not be followed by a push that ships them anyway. --fs sends them for the case that needs them — a teammate reproducing against the tree — and says so on the way out, because that is the one part of the payload the scan on either end cannot read (the objects are compressed, so a plaintext scan sees nothing).
• Never a key to a host it was not set up for. Every credential has a home — the stored key's is orca setup's gateway, an exported key's is ORCA_GATEWAY_URL, and a key exported with no URL beside it has no home at all — and it is attached only when the destination matches that home. --gateway changes where the run goes, not what the key was issued for, so pointing it elsewhere refuses the push rather than authenticating it with someone else's credential. The one case left through is a key whose only destination is the one this invocation names: nothing earlier associated it with a host, which is the CI shape.
• Never anonymously. None of the three is attempted without a key. An unauthenticated request is exactly what a misconfigured public endpoint answers, and a 200 is a poor way to learn either that your run went somewhere with no owner, or that what a listing showed you was never scoped to you.
• Never a partial replace. pull --force writes the new copy beside the old one and swaps by rename, so a crash leaves a complete run either way, and the next pull finishes or rolls back whatever the last one left behind. asks to replace a recording, which is not a licence to destroy it and then fail.

What the gateway does on arrival

It re-computes the integrity root over events.jsonl and refuses a push whose root does not match its manifest — which is why push sends the bytes already on disk and converts nothing. It also scans the archive for plaintext secrets and refuses it on a hit. That refusal is the point of --force, and why --force is opt-in: the default is what stops a key reaching a shared server.

Redaction itself is not re-run here. TraceWriter puts every event through spill, redact, validate, append on its way to disk precisely so no caller can bypass it, so the bytes push reads are already redacted; re-scrubbing them would rewrite the bytes the integrity root covers, which is the one thing that makes an archive unpushable. The gateway's scan is a second, independent line, not a repeat of the first.

Which agents

Two things decide whether a harness can be recorded: whether it can be pointed at the proxy, and whether orca understands the wire format it speaks once it arrives.

Claude Code, Hermes and goose have been driven end to end against the real harness, and each of them broke something. Claude Code broke four things; Hermes found a streaming exchange the proxy was dropping entirely; goose broke two more, and neither was in the adapter — one was the replay matcher, one was a run reporting success over a trace of nothing but errors. The rest are held to the adapter contract and to fixtures that record the exact variables each one sets, so a harness that renames the variable it reads turns a check red instead of producing an empty trace.

The harness that reads different variables

Every other OpenAI-shaped client in this table reads OPENAI_BASE_URL. goose reads it too, but it reads OPENAI_HOST first — and for Anthropic it reads ANTHROPIC_HOST and nothing else.

That combination is worse than it sounds, because both halves fail silently:

• Setting only OPENAI_BASE_URL works right up until the user already has OPENAI_HOST exported for something else. Then their value wins, the run goes to their origin, and orca prints a clean recording over an empty trace.
• ANTHROPIC_BASE_URL — the variable generic-openai sets, and the one the rest of the ecosystem reads — does nothing at all here. A sink addressed only by it receives no request.

So the adapter sets OPENAI_HOST, OPENAI_BASE_URL and ANTHROPIC_HOST, all at the same proxy, and the fixture pins all three. The traffic that arrives is the Responses API — POST /v1/responses plus one GET /v1/models on start-up — which the proxy's openai-responses dialect already claims.

GOOSE_PROVIDER=openai GOOSE_MODEL=<model> orca record goose -- run -t "fix the failing test"

GOOSE_PROVIDER and GOOSE_MODEL are passed through, never invented: goose has no default for a custom endpoint, and choosing one for you would launch a different agent than goose does.

Two limits worth knowing before you rely on it. goose runs its shell without going through orca's PATH shim, so shell tool calls are in the trace with their output but without the real exit code, duration or stdout/stderr split — record with --no-shell to claim nothing rather than that. And goose asks a second model for a session title while the conversation is already under way, so that call and the first real turn race; the replay matcher handles them arriving in either order, which it did not before goose was the first harness to do this.

A gateway that launches the coding agent

OpenClaw does not do the coding: it runs Claude Code, Codex or opencode as child processes and drives them from a chat app, so one run carries two kinds of model traffic. The gateway's own calls are caught by the fetch hook. The coding agent's calls are caught by the ordinary variables — not because OpenClaw reads them, but because a child process inherits its parent's environment, so the Claude Code it spawns sees ANTHROPIC_BASE_URL exactly as it would if you had run it yourself.

orca record openclaw

That inheritance is a property of the operating system rather than of orca, which is the kind of thing that stays obviously true right up until some layer in between sanitises the environment. So it has a test: a gateway fixture that makes no model call of its own, spawns an agent that does, and is recorded and replayed offline through the grandchild's traffic.

An agent that reads nothing at all

A bot with https://api.x.ai/v1 typed into its source reads no variable, so nothing can be redirected. It is also, by some distance, the most common shape of agent people write. Capture it below the agent instead, at the socket:

orca record exec --tls-intercept -- python bot.py
orca record exec --tls-intercept -- ./my-agent --task "fix the test"

exec (or any) launches your command and sets nothing — no origin and no credential — so the bot still talks to whoever it was already talking to, and orca reads the conversation on the way past. api.x.ai is on the default decrypt list, so a Grok bot needs no host named.

The same command reaches an agent orca did not launch, as long as something orca did launch is its ancestor. That is the shape of Codex-in-the-IDE: the extension spawns the agent as a child, so recording the editor captures the agent underneath it.

orca record exec --tls-intercept -- code .
orca record exec --tls-intercept -- cursor .

Replay needs no flags repeated. A run recorded through interception writes down which hosts it decrypted, and orca replay reads that back and re-establishes the same policy — --no-tls-intercept if you would rather it did not.

To decrypt an endpoint the default list does not cover, add it rather than replacing the list:

orca record exec --tls-intercept --tls-hosts '+my-gateway.internal' -- ./my-agent

A plain --tls-hosts a,b still means "decrypt exactly these", as it always has. Mixing the two forms is refused rather than guessed at.

An agent that is not on this machine

An agent in a dev container, on a VPS, or in someone's CI cannot be launched by orca, so there is no environment for it to build. orca attach turns it around: orca holds the proxy open, prints the block to paste on the far side, and records whatever arrives until you stop it.

orca attach --for claude
orca attach --for claude --bind 0.0.0.0 --advertise host.docker.internal
orca attach --tls-intercept          # for an agent over there that reads no variable either

info attached run=run_e3d64e15ee8f proxy=http://127.0.0.1:33437 for=claude-code

  # in the sandbox, before starting your agent:
  export ANTHROPIC_BASE_URL='http://127.0.0.1:33437'

  Recording. Press ctrl-C when the agent is done.

The variables come from the same adapters orca record uses, so a sandbox recording cannot drift from a local one. --advertise is required when you bind a wildcard: 0.0.0.0 is a statement about listening, not an address anything can dial, and orca refuses to print a URL that cannot work.

Replaying such a run has the same problem in reverse — the agent may not exist on this machine — so replay attaches too:

orca attach --replay <run>

It serves the recording with egress blocked and takes the harness from the recording itself. Point the same remote agent at it and the run happens again, offline, with no model called.

A base-URL variable orca has never heard of

Enumerating them is hopeless. Hermes overrides per provider, and its own .env.example carries NOVITA_BASE_URL, GLM_BASE_URL, KIMI_BASE_URL, MINIMAX_BASE_URL, HF_BASE_URL, NEBIUS_BASE_URL and a dozen more. A list baked into orca would be stale the week after it was written, so name the variable instead:

ORCA_BASE_URL_VARS='OPENROUTER_BASE_URL' orca record generic-openai -- hermes
ORCA_BASE_URL_VARS='GLM_BASE_URL,KIMI_BASE_URL' orca record generic-openai -- my-agent
ORCA_BASE_URL_VARS='SOMETHING_BASE_URL=/' orca record node -- node agent.mjs

Each name is pointed at the proxy with /v1 appended, which is what an OpenAI-compatible override wants; =<path> overrides that, and =/ gives the bare origin.

If you record an agent this way and it works, an adapter is about twenty lines — docs/plugins.md. If it does not, the trace is the most useful thing you can send: orca export last -o run.html.

When the harness will not be redirected

Base-URL injection captures every harness that reads a base-URL variable, and the fetch hook covers the Node ones that do not. A Codex CLI signed in with a ChatGPT subscription is neither — but not for the reason this section used to give.

It does read a provider base URL, and an explicit one overrides the ChatGPT backend; both paths even speak the same wire protocol. What is bound to that backend is the credential: a signed-in subscription carries a plan token the ChatGPT backend accepts and api.openai.com does not. Point the URL somewhere else and Codex asks for an API key instead — you are no longer recording the subscription session, you are recording a different one. Codex is Rust, so there is no fetch of ours to reach either.

--tls-intercept is the answer to that, and it is deliberately a separate decision you have to make, because it mints a certificate authority.

orca record codex --tls-intercept
orca record codex --tls-intercept --tls-hosts 'api.openai.com,*.chatgpt.com'

The CA is unique to the run, trusted only by the agent orca launches — through that child's own environment, never a system or browser trust store — and deleted when the run ends. Orca will not offer to install it anywhere. Hosts outside the allowlist are tunnelled unread and recorded as an address and a byte count, with no path and no body, because orca never held the plaintext. Asking to intercept everything is refused rather than honoured.

What comes back through it is not a log line. An intercepted request is parsed by the same wire dialects as any other, so it lands in the trace as an ordinary exchange — replayable offline and forkable to a different model, on a run that never had an API key of yours in it.

It works on orca replay --model, orca fork and orca compare too, which launch a live agent for the same reason.

For an agent, a script, or CI

A trace is a file, which is the one thing an observability dashboard cannot be — so the most useful question about a failed run is one an agent can ask: replay my last run and tell me what diverged. Every command answers as data, and orca serves itself over MCP.

$ orca replay last --json
{"runId":"run_a278eea7b535","mode":"exact","traceRunId":"run_687e3f84b208","matchedExact":2,"divergences":0,"unmatched":0,"liveCalls":0,"exitCode":0}

$ orca show last --json | jq '.events[] | select(.kind == "TOOL")'
$ orca checkpoints last --json | jq '.[-1].seq'

One JSON document on stdout, diagnostics on stderr — including the recorded agent's own output, so the document stays parseable while a run is talking. Failures answer in JSON too, with a non-zero exit. --json covers list, show, events, checkpoints, graph, record, replay, compare and doctor.

As tools. orca mcp serves the trace store to an agent over stdio:

{ "mcpServers": { "orca": { "command": "orca", "args": ["mcp"] } } }

orca_list_runs, orca_show_run, orca_checkpoints, orca_graph, orca_replay and orca_compare. Replay is free and offline; orca_compare says in its own description that it spends real tokens, because a model choosing a tool reads that string and nothing else — and orca_graph spends its description saying what recorded and inferred mean, for the same reason.

From code, if you would rather not shell out:

import { Orca } from 'orcareplay';

const orca = new Orca({ cwd: process.cwd() });
const { unmatched, divergences } = await orca.replay('last');
const timeline = await orca.show('last');

It never writes to your stdout and never calls process.exit — both asserted, because a library that does either cannot be built on.

Status

Early. v0 is the walking skeleton of the three commands above. Everything below is exercised by 1,393 tests, the trace-format conformance check and a plugin-API neutrality check, on Node 20 and 22.

Replaying a session you typed into

A run started as orca record claude and driven by hand has its prompts nowhere on the wire. Orca recovers them from the harness's own transcript and replays the session by handing them back without a terminal — which reproduces the conversation, and does not reproduce the run byte for byte. Two differences are inherent rather than defects, and orca names both rather than papering over them:

• The harness makes calls for itself. A quota probe before the first turn, a request to name the session, a delegation prompt written fresh for a sub-agent. A replay does not repeat them. The matcher steps over them onto the next real match and reports how many, so reused=3/5 on an interactive recording is a complete replay of what you asked, not a partial one.
• A terminal session is offered tools a replay cannot have. AskUserQuestion, EnterPlanMode, ExitPlanMode, EndConversation all need a person in front of them, so they are absent when the same agent is driven without one. Their schemas are large, so a request carrying them can differ from the recorded one by enough to halt; the halt says which tools are missing and why.

Recording with a prompt in argv — orca record claude -- -p "…" — has neither problem, because the replay is started exactly the way the recording was. Use that for a run you intend to replay exactly. Reading a run is unaffected either way: orca show and the viewer are complete for both.

Install

npm i -g orcareplay
orca doctor                       # checks node, git, and which agents it can find

Node 20 or newer. No native dependencies, so there is nothing to compile and nothing fetched at install time beyond the tarballs themselves.

Every release from 0.1.1 onward is published by the tagged workflow in RELEASING.md, with a provenance attestation naming the commit and the run that built it — npm shows it on the package page, and npm audit signatures checks it.

From source, to work on it or to run an unreleased commit:

git clone https://github.com/Continuum-AI-Corp/OrcaReplay && cd OrcaReplay
npm ci && npm run build
npm install -g ./packages/cli     # puts `orca` (and `orcareplay`) on PATH

npm install -g . from the repository root installs nothing: the root is a workspace with no binary of its own, and orca lives in packages/cli.

Node 20+ to run it (the CLI's own engines says >=20.0.0). Contributing needs `^20.19.0 ||

=22.12.0, because the test toolchain does; the root package.jsondeclares that separately sonpm ci` tells you up front. No account, no signup, no API key changes.

On Windows, shell capture writes .cmd shims in front of sh.exe and bash.exe (Git for Windows provides both), and Windows runs a .cmd only through a shell. So it captures a shell started through cmd.exe or PowerShell, and not one an agent starts itself: a Node harness's child_process.spawn('bash') goes straight to the real bash.exe, and Claude Code finds its shell without consulting PATH at all. orca doctor says which of the two holds on the machine, and orca record warns shell.ineffective on any run whose tool calls ran commands the shim never saw — record those with --no-shell. If no POSIX shell is on PATH, doctor warns and --no-shell is the way to record.

Where your runs are kept

Everything lands in .orca/runs/ inside the project you recorded in — per-project, never a global store, so a run travels with the checkout it belongs to. One run directory is one self-describing thing:

.orca/
  .gitignore          # just `*` — the store excludes itself, so a trace cannot be committed by accident
  runs/run_d0a2ee7ce615/
    manifest.json     # who, when, which adapter, the git commit, counts, integrity digest
    events.jsonl      # the timeline, one JSON object per line, append-only
    blobs/            # content-addressed payloads over 4 KB, deduplicated
    fs/               # shadow git index: the workspace at every turn
    shims/            # the PATH shims this run used; written by orca, read by nothing
    py/               # bootstrap for the agent-structure layer, when the agent is Python
    redactions.json   # what was removed, by rule and count — never by value

Finding an old session:

orca list                       # every run here, newest first, with what it was forked from
orca list --remote              # and what the gateway is holding, without opening a browser
orca show run_d0a2ee7ce615      # the timeline in the terminal
orca replay last                # `last` = newest recording (it skips replay traces)
orca replay run_d0a2ee7ce615    # or name one outright
orca gc --older-than 7d --dry-run   # what would be reclaimed, before anything is

orca list reads the run directories directly, so it works on a trace someone sent you: drop it in .orca/runs/ and every command sees it. Nothing indexes, and there is no database to corrupt. --remote is the one exception, and it is not an index either: it asks the gateway and prints the answer, holding nothing.

Privacy

Traces are local, mode 0600, and the recorder makes no network connection of its own. Secrets are redacted in the write path: environment capture is deny-by-default, auth headers are never written, and known key shapes plus high-entropy strings are replaced with stable placeholders.

Redaction is best-effort mitigation, not a guarantee. Treat a trace as sensitive — roughly as sensitive as a shell history plus a heap dump.

orca export last -o bug.html          # prints exactly what it is about to write
orca scrub last --match my-hostname   # remove something after the fact

orca scrub rewrites events.jsonl, the manifest and every text blob, re-runs the standard detectors, refreshes the integrity digest, and leaves binary blobs byte-identical.

It cannot rewrite the filesystem snapshots. Git objects are addressed by the hash of their own contents, so editing one changes its id, which forces every tree naming it to be rewritten and every event naming those trees after that — a history rewrite whose failure mode is a run that no longer restores. So scrub searches the snapshot store and tells you when your string is still in there, rather than reporting a clean trace it could not clean. --drop-fs deletes the store outright, at the cost of being able to fork the run.

What is open, and what is not

Always open, under Apache-2.0: the trace format, the core, the CLI, the viewer, the adapters, and the provider interface.

OrcaReplay is built by the people who build OrcaRouter, and that shows up in two places, both of them things you asked for. orca setup suggests it when you do not name a gateway — a default you can see and overtype, on a question you chose to answer, not a route anything takes on its own. And an artefact you explicitly generate — an export, a --share card — signs itself "built by the OrcaRouter.ai team", the way a chart carries its source.

Every model path stays a plain URL you can point anywhere, there is no code path that treats that origin differently from any other, and a credit line routes nothing anywhere.

What the vendor does not get is privilege. A plugin — OrcaRouter's included — may use only the public Provider interface in @orcareplay/plugin-api, with no private API behind it. No vendor plugin exists yet, so the CI job that enforces this (scripts/check-neutrality.mjs) says so and passes as a no-op; it starts building against the published package rather than workspace source the moment one lands. If a plugin ever needs a capability, that capability goes into the public interface first, with a second implementation showing it is not shaped around one vendor.

Documentation

Start here if you have a problem right now:

• My agent broke something. How do I find out why?
• Why did my agent delete that file?
• Would a different model have got this right?

Reference:

• spec/orca-trace-v0.md — the normative trace format
• docs/integrations.md — recording a framework, one command each, every number asserted in CI
• docs/architecture.md — how capture, replay and fork actually work
• docs/validation.md — what broke the first time this met a real agent
• docs/launch-path.md — what is built, what is not, and what is next
• docs/plugins.md — writing an adapter or a provider
• CONTRIBUTING.md — five-minute dev loop
• Good first issues — twelve of them, with the file to start in

Help wanted

The format is v0 and the walking skeleton works, which is the interesting point in a project's life: the decisions are still cheap to change and there is a lot of obvious work with the file to start in already written down.

• Twelve good first issues, each naming the file and the test.
• Write an adapter. One file, one fixture. If your harness reads a base-URL variable it is about twenty lines — docs/plugins.md. If it does not, node may already cover it; a recording that comes back empty from a harness not listed above is worth an issue either way.
• Add a framework to the integration checks. test/integrations/ records a real framework against a stub origin, kills the origin and replays it. Eight are covered; AutoGen, LlamaIndex, Pydantic AI and smolagents are not. A new one is a script and a row.
• Reimplement the reader. The spec is CC BY 4.0 on purpose. There is already a Python reader; Go and Rust are open.
• Break the replay. The matching ladder is the heart of this and the fastest way to improve it is a real recording it gets wrong. Open an issue with orca export last -o bug.html attached — it is one self-contained file, and orca scrub is there for anything you need out of it first.

If it saved you an afternoon, a ⭐ helps other people find it.

License

Apache-2.0 for the code. The trace specification is CC BY 4.0, so anyone may reimplement it.